+27 11 010 6249Call Now

Bathroom Butler Cubic Collection

Squared 304 stainless heated towel rails — 6 and 8 bar, 530mm and 650mm widths.
Showing: 1-9 of 9 Results
BATHROOM BUTLER
Cubic 8 Bar Straight PTS 673x955 MBLK
Regular priceR17,571.64
BATHROOM BUTLER
Cubic 8Bar 650mm Str- Tdc- Polished
Regular priceR16,897.45
BATHROOM BUTLER
Cubic 8Bar 650mm Str- Pts- Polished
Regular priceR14,644.71
BATHROOM BUTLER
Cubic 8Bar 650mm Str- Pts- Matt Black
Regular priceR17,571.64
BATHROOM BUTLER
Cubic 6Bar 650mm Str- Tdc- Polished
Regular priceR13,513.94
BATHROOM BUTLER
Cubic 6Bar 650mm Str- Pts- Polished
Regular priceR11,264.97
BATHROOM BUTLER
Cubic 6Bar 530mm Str- Tdc- Polished
Regular priceR11,790.73
BATHROOM BUTLER
Cubic 6Bar 530mm Str- Pts- Polished
Regular priceR9,346.80
BATHROOM BUTLER
Cubic 6Bar 530mm Str- Pts- Matt Black
Regular priceR11,217.17

Cubic Heated Towel Rails

Every product here is a heated towel rail. Nine are listed, all Cubic, all straight and wall mounted, all built in 304 stainless steel with a squared profile. Two sizes of 6 bar rail are listed, at 530mm and 650mm, plus an 8 bar rail at 650mm. Finishes are polished stainless steel and matt black. Every rail carries either the PTSelect switch or the TDC timer, and that choice matters more day to day than the size.

PTSelect or TDC

PTSelect stands for Personal Temperature Selection, a dial built into the rail itself. Turning it right past an audible click switches the rail on and turning it left switches it off, while turning it further raises or lowers the power setting between a minimum of 40 percent and full output. A light shows where the setting sits. It suits a household that switches the rail on and off by hand.

TDC stands for Total Digital Control, a programmable timer built into the rail, with four on and off programmes across a 24 hour cycle, four modes covering automatic running, quick run, always on and always off, a 24 hour clock, a screen lock and temperature adjustment from 30 percent up to full. If your mornings and evenings run to a pattern, TDC heats the rail around them rather than all day. If they do not, PTSelect is less fussy.

Sizing a Cubic rail

The number in the title is the rail width, not the wall space it needs. A 530mm rail wants roughly 600mm of clear wall and a 650mm rail roughly 700mm, so measure the gap between a door, a screen or a corner first. The 6 bar rails are the shorter ones. The 8 bar is noticeably taller in the same 650mm width, and is the one to fit if more than one bath towel goes on it.

Installation and ratings

Bathroom Butler rates its heated rails IPX5 and states they are certified for bathroom zones 1, 2 and 3, which includes above a bath. They use dry element heating with no fluid inside, and the maker states exposed surfaces stay below 55 degrees, tested to IEC 60335-1 and IEC 60335-2-43. You can mount one yourself using the supplied template and 700mm of cable, but in South Africa a registered electrical wireman must make the connection to the mains, through an isolator. See all heated towel rails, the unheated towel rails, or the Bathroom Butler brand page.

Frequently Asked Questions

What is the difference between PTSelect and TDC?
PTSelect is a manual dial built into the rail. You switch on and off by turning it, and you set the power anywhere from a minimum of 40 percent up to full, with a light showing the setting. TDC is a programmable digital timer. It gives four on and off programmes in a 24 hour cycle, four running modes, a clock, a screen lock, and temperature adjustment from 30 percent upward.
Which Cubic size should I buy?
Measure the clear wall first. A 530mm rail needs about 600mm of wall and a 650mm rail about 700mm, so the number in the product name is the rail, not the space. The 6 bar rails are the shorter ones and suit smaller bathrooms. The 8 bar at 650mm is taller and takes more towels, so it is the choice for a main bathroom or a shared one.
Can a Cubic heated towel rail be installed above a bath?
Bathroom Butler rates its heated towel rails IPX5 and states that they are certified for bathroom zones 1, 2 and 3, which covers the area above a bath, with certification available on request. That is the manufacturer position. Your electrician still decides the final position on site, and the rail must be connected through a proper isolator, so confirm the layout before tiling.
Do I need an electrician to install a heated towel rail?
You can mount the rail yourself. Each one comes with a mounting template, installation instructions and 700mm of cable. The connection to the mains is a different matter: in South Africa a registered electrical wireman must make that connection, and the rail needs to run through an isolating switch. Plan the cable route before tiling if you want the wiring hidden.
What finishes do the Cubic rails come in?
Polished stainless steel and matt black. Both are 304 stainless steel underneath. Matt black is the one to pair with black tapware and black accessories, and polished suits a chrome bathroom. Bear in mind that a heated rail is usually the largest metal object on the wall, so it tends to set the tone for the rest of the fittings rather than following them.

What are you looking for?

Popular Searches:  Tiles  Taps  Mixer  Bath Tubs