+27 11 010 6249Call Now

Rossco Basin & Shower Taps

Nine Rossco WATERFLOW mixers — short basin taps at 230mm, tall taps to 340mm, one concealed shower mixer.
Showing: 1-9 of 9 Results
ROSSCO
Single Lever Shower Mixer Brass
Regular priceR2,793.68
ROSSCO
Cascade Basin Mixer Antique Brass
Regular priceR5,111.84
ROSSCO
Basin Mixer Tall Black
Regular priceR4,636.32
ROSSCO
Basin Mixer Brass Body Tall
Regular priceR4,636.32
ROSSCO
Basin mixer Brass Body
Regular priceR4,160.80
ROSSCO
Basin Mixer Short Black
Regular priceR3,566.40
ROSSCO
Basin Mixer Brass Body Short
Regular priceR3,566.40
ROSSCO
Short Basin Mixer Black 230mm Height
Regular priceR2,734.24
ROSSCO
Basin Mixer Brass Body
Regular priceR2,734.24

Rossco's tapware belongs to the brand's WATERFLOW range, and the nine mixers gathered here cover two jobs at once: a basin tap that actually suits the basin it stands beside, and a shower mixer that keeps the wall uncluttered. Five are short basin mixers, three are tall basin mixers and one is a concealed shower mixer. Prices start at R2,734.

Matching tap height to the basin

Height is the decision that matters most on this page, and Rossco publishes it for each model. The short models stand 230mm high. The tall models run from 315mm to 340mm. That gap of roughly 100mm is the difference between a tap that clears the rim of a raised bowl comfortably and one that sits awkwardly over it. Rossco also lists a left to right and a front to back measurement for every model, so check the individual product page before you finalise a vanity layout.

Tall mixers for countertop bowls

A countertop basin sits on the surface, so the tap has to arc over the rim rather than into a recess. The three tall models answer that. Basin Mixer Tall Black and Basin Mixer Brass Body Tall both stand 340mm high, and the Cascade Basin Mixer Antique Brass stands 315mm with a noticeably deeper front to back footprint. Pair one with a raised bowl from the Rossco countertop basins range.

Short mixers for recessed basins

Where the basin drops into the counter or sits beneath it, the water level is lower, and a 230mm tap gives comfortable clearance without dominating the vanity. Four of the five short models measure 230mm high, two of them black and two brass bodied. They are the sensible match for a drop-in basin or an under-counter basin, where an over-tall spout only creates splash.

Colour, material and the shower mixer

Brass is recorded as the material on five of the nine taps; the remaining four carry no material value in our catalogue, so read the product page for the model you are considering. Three are black by name, the rest brass or antique brass. The Single Lever Shower Mixer Brass is the one non-basin fitting, a concealed unit that leaves only the lever and its wall plate visible. The wider range sits on the Rossco collection page, and all of it can be seen at the Kramerville showroom.

Frequently Asked Questions

What is the difference between a short and a tall basin mixer?
Height, and it changes which basin the tap suits. Rossco publishes 230mm for the short models in this collection and 315mm to 340mm for the tall ones. A short mixer is intended for a basin recessed into or below the counter, where the water level is already low. A tall mixer is built to clear the rim of a bowl that sits on top of the counter.
Which tap should I choose for a countertop basin?
A tall one. Because a countertop bowl raises the water level by the full depth of the basin, a 230mm tap will often sit too low over the rim. Basin Mixer Tall Black and Basin Mixer Brass Body Tall both stand 340mm, and the Cascade Basin Mixer Antique Brass stands 315mm. Measure your bowl height and compare it against those figures before ordering.
Does this collection include a tap for a freestanding bath?
No. Every basin mixer on this page is a deck mounted tap sized for a basin, and the only other fitting is a concealed shower mixer. A freestanding bath needs a floor-standing bath mixer, which is a different fitting entirely and is not stocked in this collection. If you are specifying taps for a freestanding bath, speak to the team rather than ordering from this page.
What are these taps made of?
Brass is recorded as the material on five of the nine taps in this collection. The other four carry no material value in our catalogue, which does not mean they are made of something else, only that the field is blank. Rather than assume, open the product page for the specific model you want and check what is listed there before you place an order.
What is a concealed shower mixer?
It is a mixer whose body is built into the wall behind the tile, so only the lever and its wall plate stay visible. The Single Lever Shower Mixer Brass in this collection is that type. It gives a very clean wall, but the pipework has to be set out before tiling, so raise it with your plumber at planning stage rather than at the finishing stage.

What are you looking for?

Popular Searches:  Tiles  Taps  Mixer  Bath Tubs