Basin Taps in South Africa: Mixers, Heights and How to Choose the Right Ones

Basin taps are the hardest-working taps in the house. They are used many times a day, so the right basin taps need to be comfortable, easy to clean and properly matched to the basin beneath them. Most problems with basin taps have nothing to do with looks: a spout that splashes onto the counter, a mixer too short for a countertop bowl, or a wall-mounted tap nobody planned for before tiling. This guide covers the main types of basin taps available in South Africa, how to match a tap to your basin, the finishes on offer and what to budget. You can browse our full range of bathroom basin taps as you read.
The Main Types of Basin Taps
Basin taps fall into four groups, defined by where the tap is mounted and how many holes it needs. Most modern basin taps are mixers, which blend hot and cold water through one spout and are usually controlled by a single lever. If you are choosing shower and bath taps at the same time, our bathroom taps buying guide covers the whole bathroom.
Short Basin Mixers
The short basin mixer, often called a monobloc mixer, is the most common basin tap in South African bathrooms. It mounts through a single tap hole in the basin or countertop and suits drop-in, under-counter, semi-recessed and wall-hung basins that have a tap hole. Our short basin taps collection holds more than 220 options, from compact guest-basin mixers to designer pieces from Hansgrohe and AXOR.
Tall Basin Mixers
Countertop basins, also called vessel basins, sit on top of the vanity, so their rim is much higher than that of a standard basin. A standard mixer would leave the spout level with the rim or below it. A tall basin mixer raises the spout high enough to clear the bowl and leaves room to wash your hands comfortably underneath. Our tall basin taps collection has around 90 models in chrome, black, brushed and coloured finishes.
Wall-Mounted Basin Mixers
Wall-mounted basin mixers project from the wall above the basin, which leaves the countertop clear and easy to wipe down. They pair well with countertop basins and with any basin that has no tap hole. The trade-off is planning. Most are sold as a finish set for concealed installation: the lever and spout that you see. The valve body, or basic set, is built into the wall before plastering and tiling, and is often bought as a separate item. In our range, wall-mounted spouts run from about 160 mm to 225 mm long, so check the reach against the depth of your basin. Browse our wall-mounted basin mixers for single-lever, two-hole and three-hole designs.
Three-Hole Mixers and Pillar Taps
Traditional bathrooms often use separate controls for hot and cold. A three-hole basin mixer has two handles and a central spout, each through its own hole, and suits classic designs such as AXOR Montreux. Pillar taps are the simplest option: one tap for hot and one for cold. They are inexpensive but do not mix the water, so today they are mostly used in utility spaces and on older two-hole basins.
How to Match Basin Taps to Your Basin
Matching the tap to the basin is the most important step in choosing basin taps. Check these four things before you buy. If you have not chosen the basin yet, our guide to bathroom basins explains the main types.
Tap Holes
Count the tap holes in the basin or countertop. One hole takes a single-lever mixer, and three holes take a three-hole mixer. No tap hole at all means either a tall mixer mounted through the countertop beside the basin or a wall-mounted mixer.
Spout Height
The spout outlet must sit comfortably above the rim of the basin, with enough space for your hands. Hansgrohe makes this easy to compare. The number in the name of a Hansgrohe basin mixer, such as 70, 110 or 240, is its ComfortZone: the space, in millimetres, between the spout and the basin. A low number suits a standard basin, while a higher number gives more room for filling a glass or washing your hair, and is the starting point for a countertop bowl.
Spout Reach
The water should land near the waste rather than hit the back of the bowl or the front edge. Too short, and your hands touch the basin; too long, and water splashes over the rim. Compare the spout projection on the specification sheet with the distance from the tap hole, or the wall, to the waste.
The Waste
Many basin mixers are sold without a waste. In our range, around 70 short and tall mixers say "without waste set" in the product name, so budget for one separately. A push-open waste, also known as a click-clack waste, is the neat modern choice. If the basin has an overflow, choose a slotted waste so that the overflow can drain. A basin without an overflow needs an unslotted waste.
Water Pressure and Water Saving
Every basin mixer lists a minimum operating pressure on its specification sheet. Check it before you buy, particularly in older homes with low-pressure geysers, where a mixer designed for higher pressure can give a weak flow.
Water and energy saving are worth a look too. Many modern mixers use aerators or flow limiters to reduce consumption without a noticeable loss of comfort. Hansgrohe's CoolStart mixers run only cold water when the lever is in the middle position, and warm water flows only when you move the lever to the left. That means the geyser is not drawn on every time someone rinses a toothbrush. More than 30 of the Hansgrohe and AXOR basin mixers in our range have CoolStart.
Finishes: Chrome, Black and Beyond
Chrome is still the most popular finish, and around 250 of the basin taps in our range are chrome. It is durable, easy to clean and suits every style of bathroom. Black is next, with more than 100 options, and our black basin mixers collection gathers the short black mixers in one place. Beyond those, you can choose bronze, gun metal, brass, brushed nickel, champagne, red gold and gold optic from Hansgrohe, AXOR, Meir and Blutide, as well as brushed stainless steel. Brushed and matt finishes hide water spots and fingerprints better than polished ones, which makes them practical for busy family bathrooms.
Basin Tap Brands at Bella Bathrooms
- Blutide: dependable value, with the Satin, Silk, Lace and Moon ranges in short, tall and wall-mounted versions.
- Gio Bella, Bathroom Butler and Franke: well-priced single-lever designs such as Genova, Solace, Valour and Aspera.
- Duravit: single-lever mixers from ranges such as A.1, C.1, D-Neo and Wave, a natural match for Duravit basins.
- Hansgrohe: the largest selection in our range, including Talis E, Finoris, Metropol, Tecturis and Vernis Blend.
- Meir: rounded designs and coloured finishes such as lustre bronze.
- AXOR: designer collections including Starck, Citterio, Montreux, One and MyEdition.
- JEE-O: sculptural stainless steel mixers, including tall freestanding basin mixers.
How Much Do Basin Taps Cost in South Africa?
Basin taps cover a wide price range. The figures below are taken from our live range at the time of writing (November 2026) and are a guide rather than a quote.
| Type | Typical price range | Best for |
|---|---|---|
| Short basin mixer, value (Blutide, Gio Bella, Franke) | R550 to R2,300 | Guest cloakrooms, rentals and family bathrooms |
| Short basin mixer, mid-range (Duravit, Bathroom Butler, Meir, Hansgrohe) | R1,600 to R7,000, with some Hansgrohe models higher | Main bathrooms and en-suites |
| Tall basin mixer | R1,100 to R20,500 | Countertop and vessel basins |
| Wall-mounted basin mixer (finish set) | R1,100 to R29,000, plus the concealed body | Clean countertops and basins without tap holes |
| Three-hole basin mixer (Hansgrohe, AXOR) | R4,400 to R31,300 | Classic and traditional bathrooms |
| Designer mixer (AXOR, JEE-O) | R10,000 to over R50,000 | Statement bathrooms |
Remember to budget for the parts you do not see: the waste, any concealed body for a wall-mounted mixer and the plumber's time.
How to Choose the Right Basin Taps
- Start with the basin. One tap hole takes a short mixer, a countertop basin takes a tall or wall-mounted mixer, and three holes take a three-hole mixer.
- Plan the plumbing. Wall-mounted mixers must be planned before plastering and tiling.
- Check height, reach and pressure. The spout must clear the rim, reach towards the waste and suit your water supply.
- Remember the waste, and match the finish to the rest of the bathroom's tapware.
See Our Basin Taps in Person
Basin taps are much easier to choose once you have felt how the lever moves and seen the finishes side by side. Visit our Kramerville showroom to compare short, tall and wall-mounted basin mixers, or browse our basin tap collection online. If you are planning a renovation, contact our team early, and we will help you match the taps to your basins, confirm the concealed parts you need and get the details to your plumber before tiling starts.
-
Posted in
basin mixer, basin taps, bathroom taps, buying guide, tall basin mixer, wall mounted basin mixer


































